contact us

Dongguan Hong Xing Furniture Accessories Co., Ltd.
Contact: Mr. Sun
Phone:13729993380
phone:0769-33661111 33691111
fax:0769-89360580
E-mail:hx@acymall.com
Site:http://www.acymall.com
Address: No. 14 North River Road, Houjie Town, Dongguan City Shuanggang industrial zone ring

Your current location is:Home >> News

News

Furniture surface treatment commonly used materials

release time:2016-08-02 15:39:59

Surface Treatment Panel Furniture rarely used paint, commonly used veneer manner, the following are several common veneer material:      1. Fire board; fire board siliceous material or calcareous materials as the main raw material, mixed with a certain proportion of fiber material, lightweight aggregate, adhesives and chemical additives, autoclave technology made decorative plates. Firewood is generally used for the outer surface of the furniture of veneer thickness is about 1mm, the appearance of many varieties, decorative feature also significantly higher than the fire characteristics.      2. Edge; plate edge banding for furniture cutting edge surface, there are PVC Edge, metal edge banding, veneer edge banding and the like.      3. grainy paper; grainy paper before using more, now generally used fire board.      4. Hardware; wherein the screw is the most common, used when the screw fastening, fiber, moisture-proof plate using screws, other properties near the wood plate with wood screws.三合一连接件

 

5. triple connections; triple connections by the eccentric member, connecting rods, composed of three parts, embedded parts, convenient and aesthetic use in the furniture, durable, and can be repeated assembly and disassembly, used by many furniture manufacturers, DIY individuals may also be used. But it requires a certain technology, generally no Bench row drill, install a triple connections required at the exact position two boards drilled three holes, but also to the depth not have too much deviation, using a hand drill operations have a certain degree of difficulty, the efficiency is lower.     6. concealed hinges; doors opened out production requires the use of concealed hinges, a full-cover (full cover), half cover (half covered, half open), full (built-in) three generally cupboard outermost door hinges using full cover, half cover the middle of the door using the hinges, concealed door hinges you need to use full.     7. Door guide; making use of sliding doors, there are also mounted on the upper end mounted on the lower end, according to the specific need.     8. The drawer rails; install drawer use, and two kinds of relatively cheap pulley pulley formula (verse 2) ball-type (three), noise, ball-type is more expensive but not very smooth sliding noise.     9. Handle; drawer door handle variety, according to their personal preferences.     10. laminates care; also challenge the support member to produce shelves, shoe racks, shelving support layer pallet use, with adjustable shelves location characteristics, the type is greater.    "Unless noted, content chosen by Hongxing furniture finishing, please indicate the link at" 

Dongguan Hong Xing Furniture Accessories Co., Ltd.. Contact: Mr. Sun Phone:13729993380
phone:0769-33661111 33691111 fax:0769-89360580 E-mail:hx@acymall.com
Address: No. 14 North River Road, Houjie Town, Dongguan City Shuanggang industrial zone ring