contact us

Dongguan Hong Xing Furniture Accessories Co., Ltd.
Contact: Mr. Sun
Phone:13729993380
phone:0769-33661111 33691111
fax:0769-89360580
E-mail:hx@acymall.com
Site:http://www.acymall.com
Address: No. 14 North River Road, Houjie Town, Dongguan City Shuanggang industrial zone ring

Your current location is:Home >> News

News

Pressure lever action principle

release time:2016-08-02 15:30:41

Pneumatic Support gas and liquid working medium is an elastic member between the pressure pipe, consisting of the piston, and a plurality of coupling rod, which is filled with high-pressure nitrogen gas inside, since the inside of the piston provided with through holes, to equalize the pressure of gas across the piston and the cross-sectional area of the piston on both sides is different, there is one end of the rod and the other end is not under gas pressure, to produce a small cross-sectional area of the pressure side, stretch, stretch the size of the support bar can be set that is different nitrogen pressure piston or set of different diameters. The difference is that with the mechanical spring, supporting bar having a near-linear elastic curve.

气压杆

 

Action principle pressure lever, moving the chair after adjusting valve, control valve so that the air pressure inside the open bar, the pressure cycle nitrogen into the upper end of the lower end of the piston, and the chair will rise when the internal pressure in the pipe control piston position to stay in the set location, height of the chair that is fixed, and chair rise and fall. Elasticity coefficient X standard support rods between 1.2 and 1.4, other parameters can be flexibly defined according to requirements and conditions. Pneumatic Support must be installed in the down position, you can not flip, which can reduce friction and ensure the best quality and buffer damping function. High-voltage products, non-random analysis, broiled, smashing touch can not be used as a handrail.      Ambient temperature: -35 ℃ - + 70 ℃. (Specific manufacturing 80 ℃) in the work force or inclination should not be the role of lateral force. Determine a fulcrum position Yes. Can accurately be guaranteed work, pressure lever (gas spring) piston rod must be installed in the down position, you can not flip, which can reduce friction and ensure the best quality and buffer damping function. Must use accurate method to install that, when closed, allowed to move through the structure of the central line, otherwise, often automatically open the door. Be installed at the desired pressure pneumatic lift chair lift telescopic rod inside the gas filling, without the pressure inside the pressure accumulator is his lowest state, when he squeezed inside the accumulator increases, play a role in lifting, load test and impact test is 200 kg. "Unless noted, content chosen by Hongxing furniture finishing, please indicate the link at" 

 

Dongguan Hong Xing Furniture Accessories Co., Ltd.. Contact: Mr. Sun Phone:13729993380
phone:0769-33661111 33691111 fax:0769-89360580 E-mail:hx@acymall.com
Address: No. 14 North River Road, Houjie Town, Dongguan City Shuanggang industrial zone ring